FW updates on DALCO JBOD servers SN F-18.05.101 -104 and F-18.11.176

  • This is the latest firmware package:
  • Copy the unzipped files to an usb stick (not in a folder).
  • Attach the stick to the server.
  • Start the server and use the EFI SHELL (boot menu F6)
  • Wait until startup.nsh automatically starts.
  • Press ENTER
  • Now it take some minutes to flash the firmware package.
  • When the server stops @ FRU/SDR selection hit 1 wait again 10 seconds
  • When it stops in the EFI SHELL press CTRL ALT DEL to reboot
  • Now it takes ~5 minutes until the BIOS flash has completed
  • DONE

-- NinaLoktionova - 2020-02-14

This topic: CmsTier3 > WebHome > WebPreferences > AdminArea2019 > HardwareCare > JBODDalcoStorageServerControllerSupport > BIOSUpdate
Topic revision: r1 - 2020-02-14 - NinaLoktionova
This site is powered by the TWiki collaboration platform Powered by Perl This site is powered by the TWiki collaboration platformCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback