<!-- keep this as a security measure: #uncomment if the subject should only be modifiable by the listed groups # * Set ALLOWTOPICCHANGE = Main.TWikiAdminGroup,Main.CMSAdminGroup # * Set ALLOWTOPICRENAME = Main.TWikiAdminGroup,Main.CMSAdminGroup #uncomment this if you want the page only be viewable by the listed groups # * Set ALLOWTOPICVIEW = Main.TWikiAdminGroup,Main.CMSAdminGroup,Main.CMSAdminReaderGroup --> ---++ *Introduction* The production is not based on crab, but on 1+3 scripts. It can be run either on the grid or on the T3 batch system. The output is (by default) stored to CSCS, and should be replicated manually to PSI. The production is divided into separate channels, e.g. Bs -> mu mu or Bs -> K mu nu. Each channel is produced in several runs. Different runs NEED different random seed initializations (else identical files are produced). The production is split into (1) gen+sim+digi step and (2) reco steps. The reco step is fast, the time-consuming part is (1). ---++ *Files* An example production setup was called [[http://cmssw.cvs.cern.ch/cgi-bin/cmssw.cgi/CMSSW/HeavyFlavorAnalysis/Bs2MuMu/test/Winter10/][Winter10]] * The `template' py files for the generation step are stored in [[http://cmssw.cvs.cern.ch/cgi-bin/cmssw.cgi/CMSSW/HeavyFlavorAnalysis/Bs2MuMu/test/Winter10/gen/][Winter10/gen]] and have the runnumber as part of the filename. * The `template' py files for the reco step are stored in [[http://cmssw.cvs.cern.ch/cgi-bin/cmssw.cgi/CMSSW/HeavyFlavorAnalysis/Bs2MuMu/test/Winter10/reco/][Winter10/reco]] and have the runnumber as part of the filename. * csh template scripts [[http://cmssw.cvs.cern.ch/cgi-bin/cmssw.cgi/CMSSW/HeavyFlavorAnalysis/Bs2MuMu/test/Winter10/gen.csh?view=markup][Winter10/gen.csh]] and [[http://cmssw.cvs.cern.ch/cgi-bin/cmssw.cgi/CMSSW/HeavyFlavorAnalysis/Bs2MuMu/test/Winter10/reco.csh?view=markup][Winter10/reco.csh]] are used to execute the job. * A PERL script [[http://cmssw.cvs.cern.ch/cgi-bin/cmssw.cgi/CMSSW/HeavyFlavorAnalysis/Bs2MuMu/perl/run?view=markup][run]] is used to submit the jobs. * Two PERL scripts [[http://cmssw.cvs.cern.ch/cgi-bin/cmssw.cgi/CMSSW/HeavyFlavorAnalysis/Bs2MuMu/perl/monGrid?view=markup][monGrid]] and [[http://cmssw.cvs.cern.ch/cgi-bin/cmssw.cgi/CMSSW/HeavyFlavorAnalysis/Bs2MuMu/perl/monSge?view=markup][monSge]] are used to submit the grid and batch jobs, respectively. * A PERL script 'replicate' (e.g. in ~ursl/perl/replicate) is used to 'replicate' the py files, replacing the (run)number in the filename and simultaneously inside the file. ---++ *Procedure* 1) create a working directory for the production (which does not go to CVS) <pre> cd Winter10 mkdir production cd production </pre> 2) run the gen step (assumes tcsh, probably) <pre> mkdir BsToMuMu cd BsToMuMu cp ../../gen/BsToMuMu_7TeV_GEN_SIM_DIGI_L1_DIGI2RAW_HLT_START-10000.py . replicate -f 10000 -l 10100 -p 10000 -t BsToMuMu_7TeV_GEN_SIM_DIGI_L1_DIGI2RAW_HLT_START-10000.py setenv MODE BsToKK && ../../../../run -c ../../gen.csh -r "STORAGE1 srm://storage01.lcg.cscs.ch:8443/srm/managerv2\?SFN=/pnfs/lcg.cscs.ch/cms/trivcat/store/user/ursl/production/Winter10/${MODE}" -t ~/grid/Winter07/grid-1.tar.gz -m batch ${MODE}_7TeV_GEN_SIM_DIGI_L1_DIGI2RAW_HLT_START-100??.py </pre> Note that the argument after -m can be 'grid' or 'batch' or 'local' or 'debug' (in which case nothing happens). 3) Wait a while and then check the progress <pre> monGrid -o </pre> If something went wrong, and you want to remove the job's broken output from the SE, use <pre> monGrid -o -r </pre> If only a specific job should be looked at, use <pre> monGrid -o -u https://wms218.cern.ch:9000/XeAJqYxM_Yysmx9N5Wve9g </pre> If you ran in batch, use <pre> monSge </pre> instead. All the monitoring scripts assume that the job information is in a file called jobs.list. 4) Do a careful job with bookkeeping which channel has progressed how far and how successful it was. 4) Run the reco step: <pre> setenv MODE BsToKK && run -c ../../reco.csh -r "STORAGE1 srm://storage01.lcg.cscs.ch:8443/srm/managerv2\?SFN=/pnfs/lcg.cscs.ch/cms/trivcat/store/user/ursl/production/Winter10/${MODE}%INFILE ${MODE}_7TeV_GEN_SIM_DIGI_L1_DIGI2RAW_HLT_START-XXXX.root" -t ~/grid/Winter07/grid-2.tar.gz -m grid ${MODE}_7TeV_RAW2DIGI_RECO_START-100??.py </pre> -- Main.UrsLangenegger - 2010-03-18
This topic: CmsTier3
>
WebHome
>
PhysicsGroupsOverview
>
PhysicsGroupBPhysics
>
Bs2MuMu
>
Bs2MuMuMCProduction
Topic revision: r2 - 2010-03-18 - UrsLangenegger
Copyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki?
Send feedback