-Y
or -X
flag for working with X applications)ssh -Y username@t3ui01.psi.ch
passwd
utility.
~/.globus/userkey.pem
and ~/.globus/usercert.pem
and make sure that the permissions are set correctly like in this output: -rw-r--r-- 1 feichtinger cms 2961 Mar 17 2008 usercert.pem -rw------- 1 feichtinger cms 1917 Mar 17 2008 userkey.pem
voms-proxy-init -voms cmsIf this fails, run the command with an additional
-debug
flag, and the error message will usually be sufficient for us to point out the problem. Make sure that your certificate is signed up with CMS as in these instructions from our Tier-2 wiki.
test-dCacheProtocols
command. You should see output like this (no failed tests): $> test-dCacheProtocols Test directory: /tmp/dcachetest-20081105-1632-8387 TEST: GSIDCAP-write ...... [IGNORE] TEST: SRMv1-adv-del ...... [SKIPPED] (dependencies did not run: GSIDCAP-write) TEST: GFTP-write ...... [OK] TEST: GFTP-ls ...... [OK] TEST: GFTP-read ...... [OK] TEST: DCAP-read ...... [OK] TEST: SRMv1-adv-del1 ...... [OK] TEST: SRMv1-write ...... [OK] TEST: SRMv1-get-meta ...... [OK] TEST: SRMv1-read ...... [OK] TEST: SRMv1-adv-del2 ...... [OK] TEST: SRMv2-write ...... [OK] TEST: SRMv2-ls ...... [OK] TEST: SRMv2-read ...... [OK] TEST: SRMv2-rm ...... [OK]Note: This tool can also be used to test remote element access (use the
-h
flag to get information on it)
|
|