HardwareThor < LCGTier2

<!-- keep this as a security measure:
   * Set ALLOWTOPICCHANGE = Main.TWikiAdminGroup,Main.LCGAdminGroup
   * Set ALLOWTOPICRENAME = Main.TWikiAdminGroup,Main.LCGAdminGroup
   #uncomment this if you want the page only be viewable by the internal people
   #* Set ALLOWTOPICVIEW = Main.TWikiAdminGroup,Main.LCGAdminGroup
-->

---+ Hardware Card for Thors
Short description about the hardware.

%TOC%

---++ Specifications
What's inside the hardware, probably depending on what we're talking about.
   * Disk controller model. Linux driver needed?
   * Network card model
   * Space that takes in the rack (U's)
   * Max CPUs, Max Disks, Max Mem slots.
   * CDROM?
   * Dual power supply?
   * Front / Back picture (maybe available online?)
   * Any other?

---+++ Power consumption (measured before and during the CPU/Disk tests)
   * Minimum
   * Maximum

---+++ Ambiental details
   * External working temperature
   * Normal CPU/memory internal temperature
   * Air flow (cubic meters per hour)
   * Noise (dB)


---++ Operations
Interesting information like how to handle it, anything interesting which is not trivial.
---+++ How to get into the ILOM
---+++ Power up/down procedures
---+++ Commands to issue in an internal console
---+++ Firmware updates
---+++ Replacement of internal components
---++++ Replacing a disk
When you need to change a disk, you need to identify:
   * The device name. You probably already have it.
   * The raid it belongs to: =cat /proc/mdstat=
   * The physical location of the disk =hd=. Print it (beware it may be different depending on the machine)
Check that the disk is no longer part of the raid (in /proc/mdstat), and go and replace the disk (can be done while the machine is up). Afterwards:
   * Check with =dmesg= that the new disk is detected, and the firmware revision is the same as the other disks
   * Partition the new disk, with a replica from a working disk. Eg: =sfdisk -d /dev/sda| sfdisk  --force /dev/sdah=
   * Add the disk to the raid it belonged to: =mdadm --add /dev/md0 /dev/sdah1=
Check the disk is visible (as spare) on the raid. Then:
   * Backup the old file =cp /etc/mdadm.conf /etc/mdadm.conf.backup=
   * IMPORTANT: Regenerate the file with the new disk: =sh /root/makemdconf.sh=


---++ Installation notes
Instructions on how to set up a new machines that arrives, with things like:
---+++ BIOS settings
---+++ RAID configuration
---+++ Drivers required / kernel compatibility
---+++ Check firmware homogeneity with other machines in the cluster


---++ Benchmarks
Information about benchmarks performed in the machine.
---+++ Disk benchmarks (i.e. Bonnie++)
Example:
%EDITTABLE{}%
| Version 1.96 | | *Sequential Output* |||||| *Sequential Input* |||| *Random* ||
| Concurrency | 1 | *Per Chr* || *Block* || *Rewrite* || *Per Chr* || *Block* || *Seeks* ||
| *Machine* | *Size* | *K/sec* | *%CP* | *K/sec* | *%CP* | *K/sec* | *%CP* | *K/sec* | *%CP* | *K/sec* | *%CP* | */sec* | *%CP* |
| xfs | 100000M | 1673 | 98 | 258522 | 32 | 164738 | 23 | 3401 | 99 | 455836 | 29 | 518.8 | 13 |
| *Latency* || 4954us | | 314ms | | 231ms | | 7143us | | 177ms | | 74101us | |
| ext4 | 100000M | 927 | 98 | 256154 | 46 | 159501 | 19 | 3983 | 99 | 530509 | 35 | 400.6 | 34 |
| *Latency* || 9114us | | 206ms | | 599ms | | 2388us | | 150ms | | 627ms | |

---+++ CPU benchmarks (i.e. HepSpec06)
---+++ Network benchmarks (i.e. Iperf)

---++ Monitoring
Instructions about monitoring the hardware 
---+++ Power Consumption
---+++ Raid Sanity
---+++ Other?

---++ Manuals
External links to manuals


---++ Issues
Information about issues found with this hardware, and how to deal with them
---+++ Issue1
---+++ Issue2
HardwareCardForm
Model name	X4540
Manufacturer	Sun
Used for	dCache
Number in production	10
You install OS inside	Yes
First purchase date	Dec09
CPU performance in HS06
Disk performance in MB/s	300
Power consumption in Watts	1000
This topic: LCGTier2 > WebHome > HardwareInformation > HardwareCards > HardwareThor
Topic revision: r1 - 2012-07-05 - PabloFernandez