Generally, Lustre should start on its own using heartbeat. It is chkconfig'd on on all the lustre nodes, and when the nodes reboot, they should negotiate between them and start all the services.

It is advised to start Lustre using only

service heartbeat start

and just wait. The action of mounting the partitions turns on the lustre-related modules. Nothing further is needed.

ALWAYS REMEMBER - be patient! It takes about 3 times longer than you want it to!

* LustreDiskChangeProcedures

* LustreFreezeUpProcedures

*OST Layout

	oss11	oss12	oss31	oss41
md11	OST0000	OST0001	OST0002	OST0003
md13	OST0008	OST0009	OST000a	OST000b
md15	OST0010	OST0011	OST0012	OST0013
md17	OST0018	OST0019	OST001a	OST001b
	oss12	oss22	oss32	oss42
md10	OST0004	OST0005	OST0006	OST0007
md12	OST000c	OST000d	OST000e	OST000f
md14	OST0014	OST0015	OST0016	OST0017
md16	OST001c	OST001d	OST001e	OST001f

-- JasonTemple - 2010-04-13

• CSCS_Lustre_Runbook_v0.8.odt: This is the sun-provided Lustre information - how the fs was created, and how to generally use it...