External link / EVO:http://evo.caltech.edu/evoNext/koala.jnlp?meeting=MDMaM82a28DuDs929lD99D
Agenda
Maintenance day report and site status
Status of Lustre problems
Status of new experiment software area
Derek: After fixing two local problems that were discovered during the installations by the central cms ops team, the CMS sw area is now ready.
Roland: LHCb sw area is ready.
Status of Phase D
Derek: We had a visit from Bull at PSI. When discussing different storage possibilities they also mentioned that they are using LSI solutions as the one suggested by CSCS in their slides. They seem to be price competitive and we now made a rather good experience with Bull in respect to a problem resolution with a DDN system that we had bought through them. Maybe one could get an offer for the HW from them (but maybe CSCS has an ETH Rahmenvertrag already for this kind of equipment).
Availability / Reliability values for July (79%) and August (47%). Numbers too low to be real, need to check numbers from VOs.
(Derek): Could CSCS give a short overview over the scheduling policies? Are there still the 100 (or so) reserved job slots for each experiment, so that we can guarantee a certain availability?
No official directive to abandon lcg-CE in favor of CREAM
AOB
Attendants
ATLAS:
CMS:
LHCb:
CSCS:
Minutes
During the maintenance we had a network problem with the SE head nodes that caused pools to go away for some time and some transfers were hanging, so we couldn't bring the site back until that was solved.
Lustre is giving trouble with the newest client version (1.8.4) so we decided to downgrade it back to 1.8.3, in a rolling downgrade.
When Atlas finishes copying the software to the NFS server (it's ongoing) we are going to mount it to all WNs and change the environment variables so that new jobs use the new area, but old jobs will still finish using the old one. This can cause some new incoming jobs not being able to find the SW that should be there, but there should not be too many and would not represent a problem.
PhaseD. We are going to ask for an offer to BULL to compare it with the one from IBM before placing the order. Also, we are still working with the numbers from last CHIPP Computing board, will be sent ASAP.